Xerox Phaser 6280 Service Manual

Phaser 6280 Color Laser Printer Service Manual ix
Moving the Printer
Warning
Parts of the printer are hot. Wait at least 30 minutes for the printer to cool
before moving or packing the printer.
■ Use the power switch to turn Off the printer, and unplug all cables and
cords. Do not turn the printer Off by pulling the power cord or using a
power-strip with an On/Off switch.
Warning
Back injury could result if you do not lift the printer properly.
■ The printer can be lifted by one person. Use safety lifting and handling
techniques when moving the printer.
■ Always move the printer separately from Tray 2.
When shipping the printer, repack the printer using the original packing
material and boxes or a Xerox packaging kit. Instructions for repacking the
printer are included in the kit. If you do not have all the original packaging, or
are unable to repackage the printer, contact your local Xerox service
representative.
Caution
Failure to repackage the printer properly for shipment can result in
damage to the printer. Damage to the printer caused by improper
packaging is not covered by the Xerox warranty, service agreement, or
Total Satisfaction Guarantee.
24.5 kg
54 lb.
s6280-296

Xerox Phaser 6280 Specifications

General

Print Resolution	Up to 600 x 600 x 4 dpi
Processor	400 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Technology	Laser
Monthly Duty Cycle	70, 000 pages
Memory	256 MB (standard)
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, B5, Executive, Legal, Letter
Maximum Paper Size	8.5 x 14 inches