8-80 Phaser 6280 Color Laser Printer Service Manual
Service Parts Disassembly
LVPS (PL9.1.4)
1. Remove the Rear Cover (page 8-12).
2. Remove the Right Side Cover (page 8-13).
3. Remove the Left Side Cover (page 8-14).
4. Remove the Top Cover (page 8-15).
5. Disconnect the 7 wiring harness connectors from the LVPS (PL9.1.4).
6. On the left side, from the LVPS Shield (PL9.1.9), remove the clamp
securing the Interlock Harness Assembly (PL9.1.3) and the clamp
securing the AC IN Harness Assembly (PL9.1.16) from the LVPS Shield
(PL9.1.9).
7. Release the wiring harnesses from the 2 saddle clamps on the LVPS
Shield (PL9.1.9) (left side).
8. Release the wiring harnesses from the 2 clamps and the 2 wiring harness
clips (right side of the LVPS Shield).
s6280-234
Clips
Clamps
(P44)
(P501)
(P502)
(P503)
(P40)
(P47)
(P48)
(P504)
Clamps
Saddle
Clamps
To Next Page
Loading...
