Xerox Phaser 6280 Service Manual

Phaser 6280 Color Laser Printer Service Manual 1-17
General Information
Operating Mode
Mode Condition Description
Running Mode The printer is under operating condition
such as running or recording.
Fusing The system keeps the operating
temperature.
Exposure The Laser Unit Motor runs at the running
speed.
Recording The system is under operating condition.
Cooling Fan The fan operates at high speed.
Control Panel
Operation
■ LCD - Backlight: On
■ LED - Ready LED is turned On.
Standby Mode The printer is under standby condition.
Fusing The system keeps the standby temperature.
Exposure The system is at Pause.
Recording The system is at Pause.
Cooling Fan The fan operates at low speed.
Control Panel
Operation
■ LCD - Backlight: On
■ LED: If printer is online, Ready LED is
turned On.
Power Saver
Mode
The printer enters into the Power Saver
mode to reduce power consumption when it
has not received print data for the specified
time.
The time to enter into the Power Saver
mode can be selected from 5 to 60 minutes
increment by 1 minute. The default Power
Save mode is 30 minutes.
Fusing The system is Off.
Exposure The system is at Pause.
Recording The system is at Pause.
Cooling Fan The system is Off.
Control Panel
Operation
■ LCD: Off, LCD Backlight: Off
■ LED: Power Saver LED is turned On.
Note: When the printer receives a print job or the Wake Up button is pressed, the
printer exits the Power Saver mode and enters the Ready mode.

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English