8-50 Phaser 6280 Color Laser Printer Service Manual
Service Parts Disassembly
Xerographics
Laser Unit (PL5.1.2)
1. Remove the Rear Cover (page 8-12).
2. Remove the Right Side Cover (page 8-13).
3. Remove the Left Side Cover (page 8-14).
4. Remove the Top Cover (page 8-15).
5. Remove the I/P Board Shield (page 8-96).
6. Remove the MCU Board Shield (page 8-94).
7. Remove the Main Fan (page 8-82).
8. Remove the LVPS Assembly (page 8-92).
9. Disconnect the Laser Unit wiring harness connector P/J12 from the MCU
Board (PL9.1.20).
10. Remove the Ferrite Core (PL5.1.22) from the Laser Unit wiring harness
and pass the connector through the hole of the Rear Shield (PL9.1.11).
To Next Page
Loading...
