Xerox Phaser 6280 - Control Panel Language Set Unsupported

Phaser 6280 Color Laser Printer Service Manual 3-95
Error Messages and Codes
Control Panel Language Set Unsupported
The Control Panel does not support the language.
Applicable Chain Link
■ Chain Link 016-610: Panel Language Set unsupported
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ MCU Board, PL9.1.20
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1. Turn the printer power Off and back
On.
2.Does the error still occur?
Replace the
MCU Board
(
page 8-86).
Complete.