1-2 Phaser 6280 Color Laser Printer Service Manual
General Information
Printer Introduction and Overview
The Xerox Phaser 6280 Color Laser Printer has a single-pass color laser-
design architecture, which offers color and mono print speed at 26/31-ppm,
and resolutions up to 600 x 600 dots-per-inch (dpi). The printer supports
Adobe PostScript 3, PCL6, USB 2.0, and 10/100 Base-TX Ethernet.
The Phaser 6280 printer provides one standard 150-Sheet Tray 1 (MPT) and
one standard 250-Sheet Tray 2. Tray 1 (MPT) supports specialty media, card
stock, and envelopes. The standard paper input is 400 sheets and the
maximum input with options is 950 sheets. The Output Tray holds 300 sheets
facedown.
The printer options add memory, paper capacity, hard drive, and functionality.
Memory upgrades are available to increase the standard RAM from 256 MB
up to 1280 MB maximum. A 550-Sheet Feeder is available as an option. Auto-
duplexing is available and no tools are required to install the Duplex Unit. A
Hard Disk Drive is available for Secure Print, Proof Print, collation, and for
storing additional fonts/forms/macros.
Technical Support Information
The Xerox Phaser 6280 Color Laser Printer Service Manual is the primary
document used for repairing, maintaining, and troubleshooting the printer.
To ensure complete understanding of this product, participation in Xerox
Phaser 6280 Service Training is strongly recommended. To service this
product, Xerox certification for this product is required.
For updates to the Service Manual, Service Bulletins, knowledge base, etc.,
go to:
â– Xerox Global Service Net - https://www.xrxgsn.com/secure/main.pl
â– Service Partners: http://www.office.xerox.com/partners
For further technical support, contact your assigned Xerox Technical Support
for this product.
To help us improve our service documentation, please complete the survey
located at:
http://www.surveymonkey.com/s.aspx?sm=kzFndf9Bad57bk5sABIHtA_3d_3d
To Next Page
Loading...
Need help?
General