Xerox Phaser 6280 - Tray 3 Size Switch (PL12.2.5)

8-106 Phaser 6280 Color Laser Printer Service Manual
Service Parts Disassembly
Tray 3 Size Switch (PL12.2.5)
1. Remove Tray 3 from the Optional 550-Sheet Feeder.
2. Remove the Tray 3 Right Cover (page 8-102).
3. Disconnect the Tray 3 Size Switch connector P/J4211.
4. Release the Clamp securing the Tray 3 Size Switch wiring harness.
5. Remove 1 screw (8 mm) securing the Tray 3 Size Switch to the Tray 3
Right Guide (PL12.2.11).
6. Release the tab on the bottom of the Tray 3 Size Switch from the square
hole of the Tray 3 Right Guide and release the 2 notches from the holes of
the Tray 3 Right Guide to remove the Tray 3 Size Switch.
s6280-260
P/J4211