Xerox Phaser 6280 Service Manual

3-98 Phaser 6280 Color Laser Printer Service Manual
Error Messages and Codes
PDL Error
Error relating to Printer Command Language (PCL) has occurred. The print
data cannot be processed by PDL.
Applicable Chain Link
■ Chain Link 016-720: PDL Error
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the print job.
1.Print a small print job (example as a
Windows test print).
2.Does the error still occur?
Go to step 2. Complete.
2 1. Reseat the Image Processor Board
(page 8-87).
2.Does the error still occur?
Replace the
Image
Processor Board
(
page 8-87).
Complete.

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English