Xerox Phaser 6280 Service Manual

Phaser 6280 Color Laser Printer Service Manual 3-149
Error Messages and Codes
MACPHY Chip Test Error
MACPHY Chip Test error occurs.
Applicable Chain Link
■ Chain Link 116-392: MACPHY Chip Test Error (Diag Mode)
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1.Reboot the printer.
2.Does the error still occur?
Go to step 2. Complete.
2 1. Reseat the Image Processor Board
(page 8-87).
2.Does the error still occur?
Replace the
Image
Processor Board
(
page 8-87).
Complete.

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English