Phaser 6280 Color Laser Printer Service Manual 8-21
Service Parts Disassembly
Control Panel Wiring Harness (PL1.2.15)
1. Remove the Duplex Unit (page 8-99), if installed.
2. Remove the Rear Cover (page 8-12).
3. Remove the Right Side Cover (page 8-13).
4. Remove the Front Latch (page 8-20).
5. Disconnect the wiring harness connector P/J2900.
6. Release the Control Panel wiring harness from the Tray 2 Drive Duct
Assembly (PL8.1.8).
s6280-184
Control Panel Harness
Front Cover Harness
P/J2900
To Next Page
Loading...
