Phaser 6280 Color Laser Printer Service Manual 8-11
Service Parts Disassembly
Fuser (PL6.1.10)
The Fuser may be hot. Turn the printer power Off and allow at least 5
minutes for the Fuser to cool before removing the Fuser.
1. Open the Front Cover.
2. Open the Duplex Gate Chute (PL6.1.13).
3. Release the Gray levers on the left and right sides of the Fuser to unlock
the Fuser from the printer.
4. Push the Fuser toward the front, and lift the Fuser up to remove it.
s6280-171
Duplex Gate Chute
To Next Page
Loading...
