Xerox Phaser 6280 - Turn Roll Assembly (PL3.2.32)

8-46 Phaser 6280 Color Laser Printer Service Manual
Service Parts Disassembly
Turn Roll Assembly (PL3.2.32)
1. Remove the Feeder Assembly (page 8-36).
2. Remove the Turn Clutch Assembly (page 8-42).
3. Remove the E-ring securing the shaft section of the Turn Roll Assembly
(PL3.2.32).
4. Remove the white Regi Bearing (PL3.2.11) securing the shaft section of
the Turn Roll Assembly.
5. Remove the black Regi Bearing (PL3.2.21) securing shaft section of the
Turn Roll Assembly.
6. Shift the Turn Roll Assembly to the left to separate the shaft section of the
Turn Roll Assembly from the right side of the Regi Chute.
7. Remove the Turn Roll Assembly.
s6280-204
Black Bearing
White Bearing