Xerox Phaser 6280 - Network Error

3-104 Phaser 6280 Color Laser Printer Service Manual
Error Messages and Codes
Network Error
Failure occurred on the Image Processor Board.
Applicable Chain Link
■ Chain Link 116-350: Network Error (On Board Network Communication
Fail)
■ Chain Link 116-351: Network Error (On Board Network Ethernet BIST
Parity/RAM R/W Error)
■ Chain Link 116-352: Network Error (On Board Network Internal
Loopback Error)
■ Chain Link 116-355: Network Error (On Board Network Fatal Error)
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1. Check the Image Processor Board
for correct installation.
2.Is the Image Processor Board
correctly installed?
Go to step 2. Reseat the
Image
Processor
Board.
Go to step 2.
2 Does the error still occur? Replace the
Image
Processor Board
(
page 8-87).
Complete.