Xerox Phaser 6280 - Dispenser Assembly (C;M;Y;K) (PL5.1.12)

8-56 Phaser 6280 Color Laser Printer Service Manual
Service Parts Disassembly
Dispenser Assembly (C/M/Y/K) (PL5.1.12)
1. Remove the Rear Cover (page 8-12).
2. Remove the Left Side Cover (page 8-14).
3. Disconnect the 4 Dispenser Motor wiring harnesses.
4. Release the 2 hooks securing the Motor Harness Duct to the printer.
5. Disconnect the Dispenser Assembly wiring harness connectors and
release the wiring harnesses from the Motor Harness Duct.
6. Slightly shift the Motor Harness Duct upward and release the convex
sections of the Motor Harness Duct from the printer. Place the 4
connectors through the hole of the Motor Harness Duct.
s6280-211
Hooks