Xerox Phaser 6280 - Download Error

3-100 Phaser 6280 Color Laser Printer Service Manual
Error Messages and Codes
Download Error
Download error has occurred because an invalid firmware was installed, the
header information, checksum, or the write destination is invalid, or protecting
the Flash.
Applicable Chain Link
■ Chain Link 016-741: Download Protect Error
■ Chain Link 016-742: Download ID Error
■ Chain Link 016-743: Download Range Error
■ Chain Link 016-744: Download Checksum Error
■ Chain Link 016-745: Download Header Error
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Process Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1. Check the Image Processor Board
for correct installation.
2.Is the Image Processor Board
correctly installed?
Go to step 2. Reseat the
Image
Processor
Board
(
page 8-87).
Go to step 2.
2 Does the error still occur when
downloading the firmware?
Replace the
Image
Processor Board
(
page 8-87).
Complete.