Phaser 6280 Color Laser Printer Service Manual 8-103
Service Parts Disassembly
Tray 3 Turn Clutch (PL12.1.5)
1. Remove Tray 3 from the Optional 550-Sheet Feeder.
2. Remove the Tray 3 Right Cover (page 8-102).
3. Disconnect the Tray 3 Turn Clutch wiring harness connector P/J4201.
4. Release the 2 Clamps securing the Tray 3 Turn Clutch wiring harness and
remove the harness.
5. Remove the K-ring securing the Tray 3 Turn Clutch to the Turn Roll
Assembly (PL12.3.4).
6. Remove the Tray 3 Turn Clutch from the Turn Roll Assembly.
To Next Page
Loading...
