3-52 Phaser 6280 Color Laser Printer Service Manual
Error Messages and Codes
4 Check the Fuser Harness for continuity.
1.Disconnect P/J17 from the MCU Board
and P/J171 from the Fuser.
2.Check continuity between P/J17 <=> P/
J171.
Go to step 5. Replace the
Fuser
Harness.
5 1. Replace the Fuser (page 8-11).
2.Does the error still occur?
Replace the
MCU Board
(
page 8-86).
Complete.
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No
To Next Page
Loading...
