Xerox Phaser 6280 Service Manual

5-6 Phaser 6280 Color Laser Printer Service Manual
Print-Quality Troubleshooting
2. Print is too light.
a. The toner may be too low. Check the amount of toner and change the
Print Cartridges if necessary.
b. In the printer Printing Preferences menu, Advanced > Details >
Draft Mode, verify Off is selected.
c. If you are printing on an uneven print surface, change the paper type
settings in the Tray Settings menu.
d. Verify that the correct type of paper is being used.
3. Toner smears or print comes off page.
a. If you are printing on an uneven print surface, change the Media Type
settings in the Tray Settings menu.
b. Verify that the paper is within the printer specifications (refer to
“Media and Tray Specifications” on page 1-23).
Light or Undertone Print
Smudges or Smears

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English