the first time delay is selected; for the second attempt, the second time delay and so on. For
the fourth and fifth attempts, the time delays are the same.
Time delay settings for the DEL_INIT_2 signal
• Str 2 delay shot 1
• Str 2 delay shot 2
• Str 2 delay shot 3
• Str 2 delay shot 4
Time delay settings for the DEL_INIT_3 signal
• Str 3 delay shot 1
• Str 3 delay shot 2
• Str 3 delay shot 3
• Str 3 delay shot 4
Time delay settings for the DEL_INIT_4 signal
• Str 4 delay shot 1
• Str 4 delay shot 2
• Str 4 delay shot 3
• Str 4 delay shot 4
Normally, only two or three reclosing attempts are made. The third and fourth attempts are
used to provide the so-called fast final trip to lockout.
GUID-36912067-F77E-457B-87D8-637CE0FA73A6 V1 EN
Figure 506: Autoreclosing configuration example
1MAC059074-MB A Section 9
Control functions
615 series ANSI 997
Technical Manual
To Next Page
Loading...
