ABB 615 Series - SMV Function Blocks; Function Block; IEC 61850-9-2 le Sampled Values Sending SMVSENDER

Name Type Values (Range) Unit Description
AI_RANGE5 Enum 0=normal
1=high
2=low
3=high-high
4=low-low
RTD input, Connectors
9-10-11c, range
AI_DB6 FLOAT32 -10000.0...10000
.0
RTD input, Connectors
13-14-12c, reported value
AI_RANGE6 Enum 0=normal
1=high
2=low
3=high-high
4=low-low
RTD input, Connectors
13-14-12c, range
AI_DB7 FLOAT32 -10000.0...10000
.0
RTD input, Connectors
15-16-12c, reported value
AI_RANGE7 Enum 0=normal
1=high
2=low
3=high-high
4=low-low
RTD input, Connectors
15-16-12c, range
AI_DB8 FLOAT32 -10000.0...10000
.0
RTD input, Connectors
17-18-12c, reported value
AI_RANGE8 Enum 0=normal
1=high
2=low
3=high-high
4=low-low
RTD input, Connectors
17-18-12c, range
3.14 SMV function blocks
SMV function blocks are used in the process bus applications with the sending of the
sampled values of analog currents and voltages and with the receiving of the sampled
values of voltages.
3.14.1 IEC 61850-9-2 LE sampled values sending SMVSENDER
3.14.1.1 Function block
SMVSENDER
GUID-6CB54826-9591-4688-8A23-AE49795C9E60 V1 EN
Figure 42: Function block
1MAC059074-MB A Section 3
Basic functions
615 series ANSI 129
Technical Manual