ABB 615 Series - R_TRIG Function Block

Signals
Table 116: MIN3 Input signals
Name
Type Default Description
IN1 FLOAT32 0 Input signal 1
IN2 FLOAT32 0 Input signal 2
IN3 FLOAT32 0 Input signal 3
Table 117: MIN3 Output signal
Name Type Description
OUT FLOAT32 Output signal
Settings
The function does not have any parameters available in LHMI or PCM600.
3.17.1.7 R_TRIG function block
Function block
GUID-3D0BBDC3-4091-4D8B-A35C-95F6289E6FD8 V1 EN
Figure 69: Function block
Functionality
R_TRIGTrig is used as a rising edge detector.
R_TRIG detects the transition from FALSE to TRUE at the CLK input. When the rising
edge is detected, the element assigns the output to TRUE. At the next execution round, the
output is returned to FALSE despite the state of the input.
Signals
Table 118: R_TRIG Input signals
Name
Type Default Description
CLK BOOLEAN 0 Input signal
1MAC059074-MB A Section 3
Basic functions
615 series ANSI 157
Technical Manual