ABB 615 Series - Operation Principle

7.1.4 Operation principle
The circuit breaker condition monitoring function includes different metering and
monitoring sub-functions. The functions can be enabled and disabled with the Operation
setting. The corresponding parameter values are “Enable” and “Disable”. The operation
counters are cleared when Operation is set to “Disable”.
The operation of 52CM can be described with a module diagram. All the modules in the
diagram are explained in the next sections.
A071103 V4 EN
Figure 453: Functional module diagram
Section 7 1MAC059074-MB A
Condition monitoring functions
880 615 series ANSI
Technical Manual