ABB 615 Series - Monitored Data

Table 757: MCS-C Non group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Operation 1=enable
5=disable
1=enable Operation Disable / Enable
Pickup value 1.0...100.0 %In 0.1 10.0 Pickup value, percentage of the nominal
current
Alarm delay time 100...300000 ms 10 3000 Alarm delay time
Alarm output mode 1=Non-latched
3=Lockout
3=Lockout Select the operation mode for alarm output
Table 758: MCS-C Non group settings (Advanced)
Parameter Values (Range) Unit Step Default Description
Reset delay time 0...60000 ms 10 20 Reset delay time
Measurement mode 2=DFT
3=Peak-to-Peak
2=DFT Selects used measurement mode
6.3.9 Monitored data
Table 759: MCS-A Monitored data
Name
Type Values (Range) Unit Description
MCS-A Enum 1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Status
Table 760: MCS-B Monitored data
Name
Type Values (Range) Unit Description
MCS-B Enum 1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Status
Table 761: MCS-C Monitored data
Name
Type Values (Range) Unit Description
MCS-C Enum 1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Status
Section 6 1MAC059074-MB A
Supervision functions
860 615 series ANSI
Technical Manual