ABB 615 Series - Monitored Data

Table 227: 50P-3 Non group settings (Advanced)
Parameter Values (Range) Unit Step Default Description
Reset delay time 0...60000 ms 1 20 Reset delay time
4.1.1.10 Monitored data
Table 228: 51P Monitored data
Name Type Values (Range) Unit Description
PICKUP_DUR FLOAT32 0.00...100.00 % Ratio of pickup time / trip time
51P Enum 1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Status
Table 229: 50P Monitored data
Name Type Values (Range) Unit Description
PICKUP_DUR FLOAT32 0.00...100.00 % Ratio of pickup time / trip time
50P Enum 1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Status
Table 230: 50P-3 Monitored data
Name
Type Values (Range) Unit Description
PICKUP_DUR FLOAT32 0.00...100.00 % Ratio of pickup time / trip time
50P-3 Enum 1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Status
1MAC059074-MB A Section 4
Protection functions
615 series ANSI 229
Technical Manual