ABB 615 Series - PCM600 and Relay Connectivity Package Version

Product series version Product series history
4.0 • User programming through Application Configuration tool
• Frequency measurement protection
• Load shedding and restoration
• Single phase power and energy measurement
• Load profile recorder
4.2
• HSR/PRP functionality
• 320 and 32U over- and underpower protection
• 27R remnant undervoltage protection
• High-impedance differential protection
5.0 FP1
New products:
• RED615
• REG615
New standard configurations:
• RED615: D and E
• REF615: D, F, L, N and P
• REG615: C and D
• REM615: A, B, D, E
• RET615: B and F
Platform enhancements
• Support for IEC 61850-9-2 LE
• IEEE 1588 v2 time synchronization
• Fault locator
• Line differential protection with in-zone transformer
• Load profile recorder
• High-speed binary outputs
• Profibus adapter support
• Support for multiple SLD pages
• Import/export of settings via WHMI
• Setting usability improvements
• HMI event filtering tool
• IEC 61850 Edition 2
• Currents sending support with IEC 61850-9-2 LE
• Support for synchronism and energizing check with IEC 61850-9-2 LE
• Software closable Ethernet ports
• Report summary via WHMI
• Multifrequency admittance-based ground-fault protection
• Support for high-impedance differential protection
• Voltage unbalance power quality option
• Additional timer, set-reset and analog value scaling functions
2.1.2 PCM600 and relay connectivity package version
• Protection and Control IED Manager PCM600 2.8 or later
• RED615 Connectivity Package Ver.5.1 or later
• REF615 Connectivity Package Ver.5.1 or later
1MAC059074-MB A Section 2
615 series overview
615 series ANSI 47
Technical Manual