ABB 615 Series - Functionality; Settings; Signals

3.17.7.2 Functionality
The move (8 pcs) function MV is used for user logic bits. Each input state is directly
copied to the output state. This allows the creating of events from advanced logic
combinations.
3.17.7.3 Signals
Table 168: MV Input signals
Name Type Default Description
IN1 BOOLEAN 0=False IN1 status
IN2 BOOLEAN 0=False IN2 status
IN3 BOOLEAN 0=False IN3 status
IN4 BOOLEAN 0=False IN4 status
IN5 BOOLEAN 0=False IN5 status
IN6 BOOLEAN 0=False IN6 status
IN7 BOOLEAN 0=False IN7 status
IN8 BOOLEAN 0=False IN8 status
Table 169: MV Output signals
Name
Type Description
Q1 BOOLEAN Q1 status
Q2 BOOLEAN Q2 status
Q3 BOOLEAN Q3 status
Q4 BOOLEAN Q4 status
Q5 BOOLEAN Q5 status
Q6 BOOLEAN Q6 status
Q7 BOOLEAN Q7 status
Q8 BOOLEAN Q8 status
3.17.7.4 Settings
Table 170: MV Non group settings (Basic)
Parameter
Values (Range) Unit Step Default Description
Description MVGAPC1 Q1 Output description
Description MVGAPC1 Q2 Output description
Description MVGAPC1 Q3 Output description
Table continues on next page
Section 3 1MAC059074-MB A
Basic functions
178 615 series ANSI
Technical Manual