ABB 615 Series - Technical Revision History

8.1.6.7 Technical revision history
Table 814: IG Technical revision history
Technical revision
Change
B -
C Residual current angle and demand value added to
Monitored data view. Recorded data added for
minimum and maximum values with timestamps.
D
Monitored data Min demand IG maximum value
range (RESCMSTA2.MinAmps.maxVal.f ) is
corrected to 40.00.
E
Internal improvement
8.1.7 Residual voltage measurement VG
8.1.7.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Residual voltage measurement RESVMMXU Uo VG
8.1.7.2 Function block
A070779-ANSI V1 EN
Figure 472: Function block
8.1.7.3 Signals
Table 815: VG Input signals
Name
Type Default Description
VG SIGNAL 0 Ground voltage
BLOCK BOOLEAN 0=False Block signal for all binary outputs
Table 816: VG Output signals
Name
Type Description
HIGH_ALARM BOOLEAN High alarm
HIGH_WARN BOOLEAN High warning
Section 8 1MAC059074-MB A
Measurement functions
916 615 series ANSI
Technical Manual