ABB 615 Series - Monitored Data

Table 705: 62EST Non group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Operation 1=enable
5=disable
1=enable Operation Disable / Enable
5.6.8 Monitored data
Table 706: 62EST Monitored data
Name Type Values (Range) Unit Description
T_ST_EMERG Timestamp Emergency start activation
timestamp
62EST Enum 1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Status
5.6.9 Technical data
Table 707: 62EST Technical data
Characteristic
Value
Operation accuracy At the frequency f = f
n
±1.5% of the set value or ±0.002 × U
n
5.6.10 Technical revision history
Table 708: ESM Technical revision history
Technical revision
Change
B Internal improvement
C Internal improvement
5.7 Fault locator 21FL
5.7.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Fault locator SCEFRFLO FLOC 21FL
1MAC059074-MB A Section 5
Protection related functions
615 series ANSI 803
Technical Manual