3.17.5.6 Technical data
Table 163: 62TON Technical data
Characteristic
Value
Operate time accuracy ±1.0% of the set value or ±20 ms
3.17.6 Set reset (8 pcs) SR
3.17.6.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Set reset (8 pcs) SRGAPC SR SR
3.17.6.2 Function block
GUID-3DD0D0F2-A477-4C73-B07C-089059EA3F26 V1 EN
Figure 88: Function block
3.17.6.3 Functionality
The set-reset (8 pcs) function SR is a simple SR flip-flop with a memory that can be set or
that can reset an output from the S# or R# inputs, respectively. The function contains eight
independent set-reset flip-flop latches where the SET input has the higher priority over the
RESET input. The status of each Q# output is retained in the nonvolatile memory. The
1MAC059074-MB A Section 3
Basic functions
615 series ANSI 175
Technical Manual
To Next Page
Loading...
