ABB 615 Series - Minimum Pulse Timer 62 TPM

Table 146: 62TPS Output signals
Name Type Description
OUT1 BOOLEAN Output 1 status
OUT2 BOOLEAN Output 2 status
Settings
Table 147: 62TPS Non group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Cold load time 0...300 s 1 0 Cold load time
Technical revision history
Table 148: 67TPS Technical revision history
Technical revision Change
B Outputs now visible in menu
C Internal improvement
3.17.2.3 Minimum pulse timer 62TPM
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Minimum minute pulse timer (2 pcs) TPMGAPC TPM 62TPM
Function block
62TPM
OUT2
OUT1
IN1
IN2
GUID-4B1768D1-AC32-4305-893F-9CEEFEA24AC8 V1 EN
Figure 80: Function block
Functionality
The Minimum minute pulse timer function 62TPM contains two independent timers. The
function has a settable pulse length (in minutes). The timers are used for setting the
minimum pulse length for example, the signal outputs. Once the input is activated, the
1MAC059074-MB A Section 3
Basic functions
615 series ANSI 167
Technical Manual