ABB 615 Series - Page 907

Table 791: Settings for limit value supervision
Function Settings for limit value supervision
Three-phase current measurement (IA, IB,
IC)
High limit A high limit
Low limit A low limit
High-high limit A high high limit
Low-low limit A low low limit
Three-phase voltage measurement (VA,
VB, VC)
High limit V high limit
Low limit V low limit
High-high limit V high high limit
Low-low limit V low low limit
Ground current measurement (IG) High limit A high limit res
Low limit -
High-high limit A Hi high limit res
Low-low limit -
Frequency measurement (f) High limit F high limit
Low limit F low limit
High-high limit F high high limit
Low-low limit F low low limit
Ground voltage measurement (VG) High limit V high limit res
Low limit -
High-high limit V Hi high limit res
Low-low limit -
Phase sequence current measurement (I1,
I2, I0)
High limit Ps Seq A high limit , Ng Seq A
high limit , Zro A high limit
Low limit Ps Seq A low limit , Ng Seq A
low limit , Zro A low limit
High-high limit Ps Seq A Hi high Lim , Ng Seq
A Hi high Lim , Zro A Hi high
Lim
Low-low limit
Ps Seq A low low Lim , Ng Seq
A low low Lim , Zro A low low
Lim
Phase sequence voltage measurement
(V1, V2, V0)
High limit Ps Seq V high limit , Ng Seq V
high limit , Zro V high limit
Low limit Ps Seq V low limit , Ng Seq V
low limit , Zro V low limit
High-high limit Ps Seq V Hi high Lim , Ng Seq
V Hi high Lim , Zro V Hi high
Lim
Low-low limit
Ps Seq V low low Lim , Ng Seq
V low low Lim ,
Table continues on next page
1MAC059074-MB A Section 8
Measurement functions
615 series ANSI 901
Technical Manual