10
Remember to remove the protective film from your MPC hardware touchscreen!
To use your MPC hardware in Standalone Mode, just connect it to a power outlet using the included power
adapter, and power it on!
Note: We highly recommend checking akaipro.com for any available updates to the MPC software/firmware and/or
drivers.
To use your MPC hardware in Controller Mode, continue to Step 2. Installation.
2. Installation
To use your MPC hardware in Controller Mode (to control the MPC software), follow these steps to download
and install the required drivers & software:
1. Go to akaipro.com and register your product. If you don’t have an Akai Professional account yet, you will be
prompted to create one.
2. In your Akai Professional account, download the MPC software package.
3. Open the file and double-click the installer application.
4. Follow the on-screen instructions to complete the installation.
Note: By default, the MPC software will be installed in [your hard drive]\Program Files\Akai Pro\MPC (Windows
®
)
or Applications (macOS
®
). You can also create a shortcut on your Desktop.
3. Getting Started
1. Power on your MPC hardware.
2. On your computer, open the MPC software.
3. Follow the on-screen instructions to authorize your version of MPC.
4. You will need an iLok account to complete this. You can create an account at ilok.com.
Make a note of the PACE code in your account, and enter it when asked for it during the authorization/unlock
process.
5. On your MPC hardware, check the upper-right corner of the touchscreen:
• If there is a monitor/cable icon, then your MPC hardware is already in Controller Mode.
Continue to Step 6.
• If there is a chip icon, then your MPC hardware is in Standalone Mode. Follow these steps:
i. Press Menu to enter the Menu.
ii. Tap the MPC chip icon in the upper-right corner.
iii. In the Enter Controller Mode window that appears, tap Controller Mode. Looking
for computer may appear briefly on the screen before your MPC hardware recognizes
the USB connection as a controller.
6. In the MPC software, click the Edit menu, and select Preferences. Click the Audio tab and select the sound
card you want to use. Click OK when you are done.
Important:
We highly recommend using your MPC hardware’s sound card (Akai Pro MPC X/Live/Live II/One/Key
61/Touch ASIO). If you need to use the internal sound card on a Windows computer, we recommend
downloading the latest ASIO4ALL driver at asio4all.com.
To view the MPC software User Guide, click the Help menu in the MPC software, select MPC Help, and select
MPC User Manual.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
