296
MIDI Tracks
The MIDI Track Mixer shows levels, panning, and mute states for all used tracks.
To view a specific setting on all tracks, tap Level, Pan, or Mute at the bottom of the screen. Tap Mute/Solo/Rec
Arm to switch between them.
When a track is selected, you can view and adjust all of its settings in the left side of the screen rather than using the
tab buttons at the bottom.
When viewing the MIDI track channel strip:
Note: This is the same as the MIDI track channel strip in Main Mode.
The first field shows the current track (which you can change).
The second field shows the current program the track is using (which you can change to a program of the same
type).
Use the MIDI Input and Channel fields to configure the MIDI input settings.
Use the MIDI Output and Channel fields to configure the MIDI output settings (MIDI tracks only).
Use the Send To field to send the track's MIDI output to another track.
Tap Solo or Mute to solo or mute the track (respectively).
Use the monitor button to set the monitor behavior for the track:
Off: The track's MIDI input is not monitored, and playback of recorded events will be heard. This setting is
useful when using keyboards with Local Control active.
In: The track's MIDI input is always monitored regardless of the track's Record Arm state, and playback from
recorded events will not be heard.
Auto: The track's MIDI input is monitored when the track is record armed, and playback of recorded events
will be heard.
Merge: The track's MIDI input is always monitored, and playback of recorded events will be heard.
Adjust the pan knob or velocity slider to change the panning or velocity of the track.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
