307
Track Mute Mode
Track Mute Mode lets you easily mute tracks within a sequence or set track groups, enabling
you to mute multiple tracks at once.
To enter Track Mute Mode, do either of the following:
• Press Menu, and then tap Track Mute.
• Press Track Mute (MPC X, MPC One, MPC Key 37), or press Mute (MPC Key 61).
• Press and hold Shift and press Pad Mute (MPC Studio).
There are two tabs you can view in this mode: Track Mute or Track Group. Tap each button in the lower-left corner
to select it. See the following Track Mute and Track Group sections to learn about each.
Use the Sequence field at the top of the screen to select a sequence.
The time counter in the upper-right corner the current playhead position. This is shown in most of the modes. See
General Features > Time Counter/Locate to learn about this.
Time Correct lets you quantize track mutes. This is useful when you want your mutes to line up with a specific time
division. For example, with Time Division set to 1 Bar, your mutes will always align with the beginning of the
measure immediately after you press the pad.
Tap Time Division at the bottom of the screen, and select a value from 1/16 to 2 Bars (T indicates a triplet-
based time division).
Tap TC at the bottom of the screen to enable or disable the Time Correct feature.
Tap Solo to turn track soloing on or off. When on, using Track Mute Mode will solo tracks instead of muting them.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
