339
Appendix
Effects & Parameters
This chapter lists the available effects. To learn more about how effects work with MPC, please see General Features
> Effects.
Effects with a * next to their name are not included with MPC and are available for purchase from thempcstore.com.
Note: Some of these effects have a “sync” version (e.g., Flanger Sync, Autopan Sync, etc.) whose rates will be
affected by the current tempo. While viewing the rate of these effects, a “.” next to the time division indicates a
triplet-based rate.
Delay/Reverb
Options: AIR Delay, AIR Diff Delay, AIR Multitap Delay*, AIR Non-Lin Reverb, AIR Reverb, AIR Spring Reverb,
Delay Analog Sync, Delay Analog, Delay HP, Delay LP, Delay Mono Sync, Delay Mono, Delay Multi-Tap, Delay
Ping Pong, Delay Stereo, Delay Sync (Stereo), Delay Tape Sync, Reverb In Gate, Reverb Large 2, Reverb
Large, Reverb Medium, Reverb Out Gate, Reverb Small, Sample Delay
AIR Delay
This is a classic delay line effect with a variable feedback
filter. Additional Ratio and Width parameters enable you to
achieve a wide range of stereo delay effects.
Parameter Value Range Default Value
Time
Sync Off
Sync On
1 ms – 2.00 s
1/32 – 8/4
388 ms
1/8D
Sync Off, On Off
Feedback 0–100% 40%
Mix 0–100% (dr
–wet) 50%
Delay Ratio 50:100 – 100:50 100:100
Delay HPF 20.0 Hz – 1.0 kHz 20.0 Hz
Delay Width 0–100% 100%
Feedback Damp 1.0 – 20.0 kHz 20.0 kHz
Feedback Reso 0–100% 0%
Fdbk. Reso Freq 100 Hz – 10.0 kHz 1.0 kHz
To Next Page
Loading...
Need help?
General
Weight and Dimensions
