125
Pads
You can set the send levels for pads in Program Edit Mode or the Pad Mixer.
To set the send levels for a pad in Program Edit Mode:
1. While editing the desired program in Program Edit Mode, press the desired pad to select it.
2. Tap the Effects tab in the lower-right corner.
3. Use the Send knobs to set the send level for each return.
To set the send levels for a pad in the Pad Mixer:
1. Use the Program field at the top of the screen to select the desired program. Alternatively, use the Track field at
the top of the screen to select the desired track—the program it uses will be selected automatically.
2. Tap the Send tab at the bottom of the screen (tap it multiple times to select a different send level).
3. Press the desired pad to select it, or tap it on the screen. Alternatively, double-tap the Pad field below the
Program field.
4. To set the send level, use the data dial or –/+ buttons. To make finer adjustments, double-tap the pad on the
screen and adjust the larger version of the slider that appears.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
