122
Submixes
You can load up to four insert effects to each submix. You can do this in the Channel Mixer only.
To load a submix insert effect:
1. Use the Mixer field in the upper-left corner to select Submixes.
2. In the touchscreen, tap the pad that corresponds to the desired program. Alternatively, double-tap the Submix
field below the Mixer field and tap the desired program.
3. Tap the area under Inserts, and then use the screen that appears to load or edit effects. Alternatively, tap the Insert
tab at the bottom of the screen (tap it multiple times to select a different insert slot), and then double-tap the desired
pad on the screen. You could also use the data dial or –/+ buttons to select an effect immediately.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
