303
Main Outputs
The Main Outputs Mixer shows levels, panning, mute states, and insert effects for all used stereo pairs of outputs
(Out 1,2–7,8 in Standalone Mode, Out 1,2–31,32 in Controller Mode; MPC Live/MPC Live II do not use Out 7,8 and
MPC One/MPC Key 61/MPC Key 37 do not use Out 3,4–7,8 in Standalone Mode, but displays them to maintain
compatibility with MPC X, which does use them).
To view a specific setting on all outputs, tap Level, Pan, Mute, or Insert at the bottom of the screen. You can tap
Insert multiple times to cycle through the four available slots.
When viewing the main output channel strip:
Note: This is the same as the main output channel strip in Main Mode.
The first field shows the current main output (which you can change).
The Inserts field shows any enabled or disabled effects for that main output. Tap the area under Inserts to open
a window where you can load, change, and enable or disable the effects for all four insert slots.
Tap Mute to mute that main output.
Adjust the pan knob or level slider to change the panning or level of the main output.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
