415
AIR Electric
The AIR Electric plugin emulates the sound of classic
electric pianos. Dedicated Pickup, Envelope, Bell and
Noise parameter sections provide a huge amount of
flexibility to configure the timbre of the electric piano
sound. Electric also includes five AIR effects: Tremolo,
Tube Distortion, Chorus, Delay and Spring Reverb.
While viewing any of the tabs listed below, you can
quickly enable or disable the Bell and Noise sounds, as
well as the built-in effects (Tremolo, Tube, Chorus, Delay
and Spring Reverb).
When viewing a specific tab, you can enable or disable
the sound or effect by pressing the circle in the upper-
right corner of each section.
Pickup/Env
Use this tab to edit the settings for the emulated pickup and the sound envelope.
Parameter Description Value Range
Pickup Type Type of pickup emulated. Pickup, 0–100%
Electro-Static,
0–100% Electro-
Magnetic
Hei
ht Hei
ht of the pickup to the tines. 0.0 – 5.0 mm
Distance Distance of the pickup to the tines. 0.1 – 10.0 mm
Clip
mount of clippin
applied to the si
nal. 0–100%
Keytrack Ties the pickup parameters to the pitch being played.
At higher values, the Distance is increased as the
pitch is increased.
0–100%
Envelope Attack Length of time for the note to reach full volume. 100–0% Hard,
0–100% Soft
Decay Length of time for the note to reach the sustained
volume.
100 ms – 20.0 s
Release Length of time for the note to become silent after
being released.
100 ms – 5.0 s
Peak Len
th Len
th of time full volume is held before decayin
. 3–50 ms
Keytrack Ties the envelope parameters to the pitch being
played.
At higher values, the envelope time is decreased as
the pitch is increased.
0–100%
To Next Page
Loading...
Need help?
General
Weight and Dimensions
