128
Submixes
You can set the send levels for submixes in the Channel Mixer only.
To set the send levels for a submix:
1. In the Channel Mixer, use the Mixer field in the upper-left corner to select Submixes.
2. Tap the Send tab at the bottom of the screen (tap it multiple times to select a different send level).
3. In the touchscreen, tap the pad that corresponds to the desired submix. Alternatively, double-tap the Submix
field below the Mixer field.
4. To set the send level, use the data dial or –/+ buttons. To make finer adjustments, double-tap the pad on the
screen and adjust the larger version of the slider that appears.
To Next Page
Loading...
