112
Erase
The Erase function erases all or part of a track in a specific sequence.
To open the Erase window, press the Erase button. Alternatively, while in Main Mode, tap the pencil icon on the
right edge of the section, and then tap Erase in the screen that appears.
To select the sequence you want to erase, use the Sequence field.
To select the track you want to erase within the sequence, use the Track field.
To set the time range of the sequence you want to erase, use the Bar, Beat, and Tick fields. The left fields set
the start of the time range, and the right fields set the end of the time range.
To select what types of events you erase, select one of the Erase options:
All erases all pad events from the designated time range and reset all of its settings.
Automation erases only automation from the designated time range. Use the Parameter field to select what
type of automation is erased.
Note erases only specific pad events from the designated time range. In the diagram of the eight pad banks that
appears, press each pad in each bank to select or deselect its notes.
Except Note erases everything except pad events from the designated time range.
To confirm your choice, tap Do It.
To cancel and return to the previous screen, tap the X, Cancel, or anywhere outside the window.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
