395
Addenda
Updates in MPC 2.1
New Features
Exporting Expansions
You can export MPC Expansion Packs (installed on your computer) to your MPC hardware for use in its Standalone
Mode. (This has been added to Operation > Modes > Browser > Browse.)
To export MPC Expansions:
1. Connect your MPC hardware to your computer. Make sure both are powered on.
2. On your computer, open the MPC software.
3. On your MPC hardware, enter Controller Mode.
4. In the MPC software window, click the menu icon (≡), select File > Export, and then click Expansion….
5. In the Export Expansion to Standalone MPC window that appears, click the Drive menu and select a storage
device that you will use with your MPC hardware: the internal SATA drive (if you have installed one in your MPC
hardware), an SD card, or a USB flash drive.
6. In the Expansions list, click the box next to each one to select or deselect it. Only the selected ones will be
exported. Click Select all to select all of them or Select none to deselect all of them.
7. Click Export to start exporting, or click Cancel to close the window and not export anything.
The exporting process creates an Expansions folder at the root level of your storage device and copies your
MPC Expansions into it.
To use your expansions, restart your MPC hardware in Standalone Mode, enter the Browser, and tap
Expansion.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
