Akai MPC Live User Manual

342
AIR Spring Reverb
This is a spatial effect, designed to emulate the sound of a
spring reverb tank.
Parameter Value Range Default Value
Pre-Delay 0–250 ms 3 ms
Time 1.0–10.0 s 4.0 s
Mix 0–100 (dry–wet) 50%
Diffusion 0–100% 100%
Width 0–100% 0%
Low Cut 20.0 Hz –1.0 kHz 141 Hz
Delay Analog Sync
Analog Delay is similar to Mono Delay, except that it’s
designed to emulate an analog “Bucket Brigade”-style delay.
This delay has a unique character to it that gives a warmer
sound by adding subtle inaccuracies in phase and timing.
Parameter Value Range Default Value
Dry/Wet 0–100 (dry–wet) 50
Time 1 bar – 1/16 triplets 1/4
Feedback 0–100 50
Ramp 0–100 50
Delay Analog
Analog Delay is similar to the Mono Delay, except that it’s
designed to emulate an analog “Bucket Brigade”-style delay.
This delay has a unique character to it that gives a warmer
sound by adding subtle inaccuracies in phase and timing.
Parameter
V
alue Range Default
V
alue
Dry/Wet 0–100 (dry–wet) 50
Time 2–2000 ms 100
Feedback 0–100 25
Delay HP
HP Delay is identical to the Mono Delay, but it uses a
resonant high-pass filter in the delay line.
Parameter
V
alue Range Default Value
Dry/Wet 0–100 (dry–wet) 50
Time 2–2000 ms 100
Feedback 0–100 50
Cutoff 0–100 33
Resonance 0–100 33
Delay LP
LP Delay is identical to the Mono Delay, but it uses a
resonant low-pass filter in the delay line.
Parameter Value Range Default Value
Dry/Wet 0–100 (dry–wet) 50
Time 2–2000 ms 500
Feedback 0–100 50
Cutoff 0–100 50
Resonance 0–100 20

Akai MPC Live Specifications

General

Built-in display	Yes
Mixer section	-
Product color	Black
Number of drum pads	16
Built-in optical drive	No
USB version	3.2 Gen 1 (3.1 Gen 1)
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
USB ports quantity	3
Headphone connectivity	3.5 mm
Cables included	USB

Weight and Dimensions

Depth	223 mm
Width	410 mm
Height	67.5 mm
Weight	2721.55 g