Akai MPC Live User Manual

179
Tap the Filter button to open the Track MIDI Perform Settings window, where you can set parameters for incoming
MIDI data.
• Note Range: This determines the Note Min and Note Max range that passes MIDI. Notes outside this range will
not be heard in the track. You can also adjust this directly from Track View by using the Keyrange fields. Tap
Learn and press the desired note for the Min and Max values.
• Velocity Range: This determines the Velocity Min and Velocity Max that passes MIDI. Velocities outside this
range will not be heard in the track.
• MIDI CC Filter: Check these boxes to allow the listed MIDI Control Change messages to pass through the track.
When unchecked, the MIDI CC message type will be ignored by the track. You can filter the following MIDI CC
messages:
CC1 Modulation
CC2 Breath
CC3 Undefined
CC4 Foot
CC5 Portamento
CC7 Volume
CC10 Pan
CC11 Expression
CC64 Sustain On/Off
CC65 Pmento (Portamento) On/Off
CC66 Sost (Sostenuto) On/Off
CC67 Soft Ped (Soft Pedal) On/Off
CC68 Legato Switch
CC128 Pitchbend
CC130 Program Change
CC129 Channel Pressure
CC131 Aftertouch

Akai MPC Live Specifications

General

Built-in display	Yes
Mixer section	-
Product color	Black
Number of drum pads	16
Built-in optical drive	No
USB version	3.2 Gen 1 (3.1 Gen 1)
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
USB ports quantity	3
Headphone connectivity	3.5 mm
Cables included	USB

Weight and Dimensions

Depth	223 mm
Width	410 mm
Height	67.5 mm
Weight	2721.55 g