Akai MPC Live User Manual

237
To adjust the effect’s parameters, tap the pencil icon. Use the sliders to set the value of each parameter. These
values affect only this instance of the effect; insert effects are not global.
Sends
The audio of the pad will be routed to send effects (if you have any loaded) at their designated send levels. The return
channels will then send the audio to an assigned main output at the designated return levels.
Use the Send knobs to set the volume level of the signal the pad will route to each send effect.
Important: To set the send level, use, you have to load an effect into the corresponding send effect slot in the
Channel Mixer. See Channel Mixer > Returns to learn more how to do this. To learn about send effects, please see
General Features > Effects > Send/Return Effects.
Drum FX
The Drum FX tab lets you add and control up to eight effects per pad in a Drum program. See Addenda > Updates
in MPC 2.10 > New Features > Drum and Keygroup Program Improvements to learn more.

Akai MPC Live Specifications

General

Built-in display	Yes
Mixer section	-
Product color	Black
Number of drum pads	16
Built-in optical drive	No
USB version	3.2 Gen 1 (3.1 Gen 1)
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
USB ports quantity	3
Headphone connectivity	3.5 mm
Cables included	USB

Weight and Dimensions

Depth	223 mm
Width	410 mm
Height	67.5 mm
Weight	2721.55 g