72
Let’s apply some processing to the sample.
To open the Process Sample window, tap Process at the bottom of the screen.
1. Use the data dial or –/+ buttons to select the desired process in the Function field. Alternatively, tap Function
or double-tap the Function field, and then tap the desired process. Let’s select Pitch Shift to change the overall
pitch of your sample. This will transpose the sample without affecting its length.
2. To set the pitch shift amount, tap and drag the knob in the center of the window up or down. Alternatively, use
the data dial or –/+ buttons.
To make finer adjustments, double-tap the knob and adjust the larger version that appears. Tap anywhere else
to return to the previous screen.
3. To confirm your selections, tap Do It.
To cancel the process, tap Cancel.
See Operation > Modes > Sample Edit Mode to learn more.
To Next Page
Loading...
