84
Alternatively, assign samples in a drum program in Program Edit Mode in one of these two ways:
1. Press Menu, and then tap Program Edit to enter Program Edit Mode. Alternatively, press Prog Edit (MPC X,
MPC One), or press Edit (MPC Key 61, MPC Key 37).
2. Tap the Samples to view any of the last three pages. These lets you view the samples assigned to all four layers
of the current pad as well as other parameters such as tuning, level, panning, or offset for each layer.
3. Tap a pad to select it (and play its assigned samples, if any). The pad will be lit green.
4. Tap one of the Layer fields under the sample waveform to select a layer. Tap the Sample field, and then use the
data dial or –/+ buttons to select a sample. Alternatively, double-tap the field for a layer, and then tap a sample
to select it.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
