Introduction Configuring SNTP
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-84
DSTSTART Used to specify a date for the start of Daylights Savings
Time (DST). Depending on the region, this may either
be a fixed calendar date or an offset relative to a day of a
given month. For example, if DST starts on the second
Sunday in March at 02:00, the DSTSTART parameter is
set to 01.00.03/02:00:00.
The date is represented as either a month and day
combination in the format mmm-dd where:
• mmm can either be a number between 1-12
(1=January and 12=December) or one of the
following three letter month abbreviations:
JAN,FEB,MAR,APR,MAY,JUN,JUL,AUG,SEP,OC
T,N OV, D E C .
• dd is the day of the month starting with 1.
The other format is used to specify something like
“the first Sunday in March.” This format is in the
format wwww.ddd.mmm, as follows:
• www - 1ST,2ND,3RD,4TH,LAST
• ddd - SUN,MON,TUE,WED,THU,FRI,SAT
• mmm -
JAN,FEB,MAR,APR,MAY,JUN,JUL,AUG,SEP,OC
T,N OV, D E C
If hh:mm:ss is not supplied by the user for DST-
START or DSTEND a value of 02:00:00 will be
used as the default.
02:00:00
DSTEND Used to specify a date for the end of Daylights Savings
Time (DST). Depending on the region, this may either
be a fixed calendar date or an offset relative to a day of a
given month. For example, if DST ends on the first Sun-
day in November at 02:00, the DSTEND parameter is
set to 00:00:11/02:00:00.
Refer to DSTEND for more information.
DSTUT-
COFFSET
Specifies a value (hour and minutes) to be used as the
UTC offset when DST is in effect. The offset can be any
value between -23:59 and +23:59 (e.g., +5:45).
DST Turn the Daylight Saving Time feature on or off. OFF
Option Description Default Value
To Next Page
Loading...
