Introduction CFC Media (SD Card)
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-112
SHOW SCRIPT
Syntax
SHOW SCRIPT=filename
Description Displays the contents of a Command Line Interface (CLI) script. A script contains CLI
commands that are executed through the EXECUTE SCRIPT command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example SHOW SCRIPT CLIENT_EPSR_SETUP
Option Description Default Value
SCRIPT The filename of a valid script file N/A
To Next Page
Loading...
