Allied Telesis SwitchBlade x3100 Series User Manual

Introduction CFC Media (SD Card)
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-114
STOP TRANSFER
Syntax
STOP TRANSFER={ transferid-list | ALL }
Description Aborts an in-progress or pending file transfer. Only transfers to/from a network server
can be stopped. File transfers from the CFC flash file system to a card in the shelf cannot
be stopped. Stopping a transfer that is in progress deletes the destination file, but does
not affect the source file.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
STOP TRANSFER ALL
Option Description Default Value
TRANSFER The transfer ID(s), separated by a comma. ALL

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English